www.patioumbrellausa.com

Ceiling support and upper-pole for mounting to ceiling. Can only be used on a concrete or hardwood ceiling. Available in Silver only.

Top and bottom fitting added to Single/Double Pole allows pole to be compression mounted between a ceiling and floor, edge of a roof and floor, or window frame and floor. Maximum height 9' 6". (Not suitable for Telescopic Pole.)

For mounting the Single/Double Pole or Telescopic Pole to existing concrete patio. Includes Spigot, matching 9" diameter Base Plate, and hardware to (1) bolt Base Plate to concrete patio and (2) bolt Spigot to Base Plate. (Spigot = 11" tall, 9" diameter round plate; Base Plate = 9" diameter, 3/8" thick.)

For mounting the Single/Double Pole or Telescopic Pole to a wooden deck. Includes Spigot, two matching 9" diameter Base Plates, and hardware to (1) bolt two plates together (2) bolt Spigot to top plate and (3) shore up joists. Place one plate on top of deck and other below deck, fasten with machine bolts, then bolt Spigot to top plate.

Free-standing option for mounting the Single/Double Pole or the Telescopic Pole. Consists of three parts: (1) Wooden Box without bottom (2) Pedestal and (3) Triangle Spigot. Add substantial extra weight to top of Pedestal if not bolted to surface (220 to 550 lbs depending on number of umbrellas used).

For mounting the Single/Double Pole or Telescopic Pole into the ground or building into newly poured concrete. Consists of three parts (1) underground section to be concreted (2) top section to mount the pole over and (3) cover-up cap useful during off season. Top section can be taken off when not in use to eliminate tripping hazard.

Set of two stainless steel U-brackets fit in the tracks of a Single/Double Pole or Telescopic Pole to fasten the pole against a low-level wall or a solid railing.

150 lb base is acceptable weight for Single Pole Mount or Double Pole Mount. Includes Paraflex Spigot (bolts to top of base, pole slides over spigot).